Long Neck End Mill 1mm

Here are some popular long‑neck 1 mm end mills you might consider, along with their key specs and appropriate use cases:

🔹Long‑Neck End Mill (4‑flute, 1 mm dia)

• Diameter: 1.0 mm

• Flute length: 1.5 mm

• Neck length: varies — 6 mm,8mm,10mm,12mm,14mm16mm,18mm, available

• Total length: 50 mm

• Shank diameter: 4 mm; neck diameter 

• Coating & hardness: TiAlN for 40–55 HRC — suitable for hardened steels

• Use case: Deep slotting and rib/mold work in hard materials; 4-flute design allows good chip evacuation, even in dry, high-speed cutting

 (4‑flute solid carbide long‑neck, 1 mm dia)

• Diameter: 1 mm

• Flute length: 3 mm

• Shank diameter: 4 mm

• Overall length variants: 50 mm

• Helix angle: 30°

• Material: Solid carbide; lengths below shank vary from ~3 mm to 50 mm depending on model

• Applications: Precision machining in steels & alloys, deep pocket work; 4-flute geometry suits finish passes and smooth finishes 

🛠️ Practical Recommendations

• For deep, narrow milling (e.g. molds, ribbing): the APT series is excellent due to its long necks (4–8 mm) and hardened coating.

🛍️ Available Options

Here are some purchasable 1 mm long-neck end mills:

• 1 mm 4‑Flute Carbide End Mill: Likely similar to models—rigid, 4-flute, for fine finish work (55 HRC rating noted).
  

🧠 Final Tips

• Keep stickout as short as possible—long-tool deflection is a common issue 

• Ramp into cuts and avoid full-diameter plunging.

• Consider coated tools (TiAlN) for heat resistance when machining hardened steels.